marker t

portable sandblaster
GLASS MARKING, A KEY REQUIREMENT

Glass identification requirements, and increasingly stringent regulation in the field of glass for the building industry, make glass marking an important factor today. These equipments represent the ideal solution for every marking need on any type of glass.

A CLEAR AND PERMANENT MARK ON THE GLASS

Sand-jet marking equipment allows to carry out a clear and permanent mark on the glass. This fact, together with the high cost-effectiveness of the process, make this technique advantageous in comparison with other marking techniques. Considered the low investment needed and the minimal process costs, this method can represent a convenient solution for large companies as well as for small and medium sized enterprises.

MAXIMUM FLEXIBILITY IN MARKING

The Marker T series, which consists of two portable models (M101T and M301T), is a portable unit and this enables to carry out the marking operation on already installed glass panels. The unit is equipped with a built-in dust filter and an abrasive material container and the stencil with the logo, made of highly abrasion-resistant stainless steel, can be rotated so that the logo can be carried out in any position. The MARKER T series is also equipped with a timer, that allows to optimize the production time and preserves the steel mask from premature wear.

EXAMPLES OF POSSIBLE LOGOS

> Company’s logo
> Numbers
> Safety standards
> Codes
> Indication of the type of glass
> Small decorations

GLASS MARKING GETS BIGGER
Marker301T allows you to imprint a marking with a diameter of up to 30 mm on the surface of glass and mirrors, guaranteeing the same quality and sharpness of marking as the standard version with a diameter of 25 mm (M101T). The new version was developed to meet the needs of an internationally leading group in the production and processing of flat glass, which needed to impress on the surface of the glass a lot of information about the compliance of its products with international standards (ANSI, CFR, SCGG, UNI, EN, CE, etc.).

MODEL

MARKER 101T

The best way to make your mark

— Customized logos
— Automatic recovery of the abrasive material

PROCESSING
Portable: ● Max marking area (ø): 25mm Manual timer: ●
CONSUMPTION & PERFORMANCE
Electrical consumption:1,3kW Compressed air consumption/gun: 350L/min Working pressure: 6-8Bar Indicative lifespan of the steel mask (marks)*: 500-900nr

* This data may vary depending on many factors: abrasive material used, type of logo, etc.

OPTIONAL
SQ 101 – Adjustable metal square: ●




MORE INFO

MODEL

MARKER 301T

How to make a great brand

— Customized logos
— Automatic recovery of the abrasive material

PROCESSING

Portatile: ●
Max. marking area (ø): 30mm

STANDARD CONFIGURATION

Manual timer: ●

CONSUMPTION & PERFORMANCE

Electrical consumption: 1,3kW
Compressed air consumption/gun: 350L/min
Working pressure: 6-8Bar
Indicative lifespan of the steel mask (marks)*: 200-400nr

 

* This data may vary depending on many factors: abrasive material used, type of logo, etc.

 
OPTIONAL

SQ 101 – Adjustable metal square: ●




MORE INFO

Newsletter